TC_057_CSMS — Central Smart Charging - TxProfile

Source: OCPP 1.6 — Compliancy Testing Tool — Test Case Document (Trial 2025-06, Draft). System Under Test: Central System, page 174.

Identification

Field	Value
Test case name	Central Smart Charging - TxProfile
Test case Id	TC_057_CSMS
System under test	Central System

Description

The Central System sets a schedule for a running transaction.

Purpose

To check whether the Central System is able to set a schedule for a running transaction on a Charge Point.

Prerequisite(s)

The Central System supports the Smart Charging feature profile.

Before (Preparations)

Configuration State(s):

Memory State(s):

Reusable State(s):

Charging

Scenario Detail(s)

Charge Point (SUT)	Central System (Tool)
2. The Charge Point responds with a SetChargingProfile.conf	1. The Central System sends a SetChargingProfile.req

Tool validation(s)

Charge Point side:

Step 2:

(Message: SetChargingProfile.conf) status is Accepted

Central System side:

Step 1:

(Message: SetChargingProfile.req) connectorId<Configured connectorId> AND csChargingProfiles.ChargingProfilePurpose TxProfile AND csChargingProfiles.transactionId<Generated transactionId> csChargingProfiles.recurrencyKind is <Omitted> AND csChargingProfiles.chargingProfileKind is Absolute or Relative AND if csChargingProfiles.chargingProfileKind is Absolute: csChargingProfiles.validFrom<Not omitted> AND csChargingProfiles.validTo<Not omitted> AND csChargingProfiles.chargingSchedule.startSchedule <Not omitted> AND csChargingProfiles.chargingSchedule.duration<Not omitted> AND if csChargingProfiles.chargingProfileKind is Relative: csChargingProfiles.chargingSchedule.startSchedule <Omitted>

Expected result(s) / behaviour

Charge Point side:

Central System side: