TC_064_CSMS — Data Transfer to a Central System
TC_064_CSMS — Data Transfer to a Central System
Source: OCPP 1.6 — Compliancy Testing Tool — Test Case Document (Trial 2025-06, Draft). System Under Test: Central System, page 179.
Identification
| Field | Value |
|---|---|
| Test case name | Data Transfer to a Central System |
| Test case Id | TC_064_CSMS |
| System under test | Central System |
Description
The Charge Point sends a vendor specific message to the Central System.
Purpose
To check whether the Central System can reject vendor specific messages.
Prerequisite(s)
The Central System does not support DataTransfer for a specific vendorId.
Before (Preparations)
Configuration State(s):
- N/a
Memory State(s):
- N/a
Reusable State(s):
- N/a
Scenario Detail(s)
| Charge Point (SUT) | Central System (Tool) |
|---|---|
| 1. The Charge Point sends a DataTransfer.req message with a specific vendorId to the Charge Point. | 2. The Central System responds with a DataTransfer.conf message. |
Tool validation(s)
Charge Point side:
- N/a
Central System side:
Step 2:
(Message: DataTransfer.conf) The status is Rejected OR UnknownMessageId OR UnknownVendorId Note: The statusAccepted is allowed, but the vendor should be warned about this behaviour.
Expected result(s) / behaviour
Charge Point side:
- N/a
Central System side:
The Central System does not accept the DataTransfer.req.