Skip to content
Documentation Menu

TC_075_1_CS — Install a certificate on the Charge Point - ManufacturerRootCertificate

TC_075_1_CS — Install a certificate on the Charge Point - ManufacturerRootCertificate

Source: OCPP 1.6 — Compliancy Testing Tool — Test Case Document (Trial 2025-06, Draft). System Under Test: Charge Point, page 97.

Identification

FieldValue
Test case nameInstall a certificate on the Charge Point - ManufacturerRootCertificate
Test case IdTC_075_1_CS
System under testCharge Point

Description

The Central System requests the Charge Point to install a new manufacturer root certificate.

Purpose

To check if the Charge Point is able to install a certificate.

Prerequisite(s)

  • The Charge Point supports Security profile 2 and/or 3.
  • The tester configured the root certificate in the store.

Before (Preparations)

Configuration State(s):

  • N/a

Memory State(s):

  • N/a

Reusable State(s):

  • N/a

Scenario Detail(s)

Charge Point (SUT)Central System (Tool)
2. The Charge Point responds with a InstallCertificate.conf1. The Central System sends a InstallCertificate.req
4. The Charge Point responds with a GetInstalledCertificateIds.conf3. The Central System sends a GetInstalledCertificateIds.req

Tool validation(s)

Charge Point side:

Step 2:

(Message: InstallCertificate.conf) status is Accepted

Step 4:

(Message: GetInstalledCertificateIds.conf) The status is Accepted certificateHashData is <Includes the certificate information of the installed certificate from step 1.> The OCTT verifies that the certificate is present, based on its own calculation of the certificateHashData.

Central System side:

Step 1:

(Message: InstallCertificate.req) certificateType is ManufacturerRootCertificate certificate is <Certificate from the store>

Step 3:

(Message: GetInstalledCertificateIds.req) The certificateType is ManufacturerRootCertificate

Expected result(s) / behaviour

Charge Point side:

  • N/a

Central System side:

  • N/a