TC_075_1_CSMS — Install a certificate on the Charge Point - ManufacturerRootCertificate

Source: OCPP 1.6 — Compliancy Testing Tool — Test Case Document (Trial 2025-06, Draft). System Under Test: Central System, page 182.

Identification

Field	Value
Test case name	Install a certificate on the Charge Point - ManufacturerRootCertificate
Test case Id	TC_075_1_CSMS
System under test	Central System

Description

The Central System requests the Charge Point to install a new Manufacturer root certificate.

Purpose

To check if the Central System is able to install a certificate on the Charge Point.

Prerequisite(s)

The Central System supports Security profile 2 and/or 3.

Before (Preparations)

Configuration State(s):

Memory State(s):

Reusable State(s):

Scenario Detail(s)

Charge Point (SUT)	Central System (Tool)
2. The Charge Point responds with a InstallCertificate.conf	1. The Central System sends a InstallCertificate.req
4. The Charge Point responds with a GetInstalledCertificateIds.conf	3. The Central System sends a GetInstalledCertificateIds.req

Tool validation(s)

Charge Point side:

Step 2:

(Message: InstallCertificate.conf) status is Accepted

Step 4:

(Message: GetInstalledCertificateIds.conf) The status is Accepted certificateHashData is <Includes the certificate information of the installed certificate from step 1.> Note: This test case must be executed with a Root CA certificate in order to get the correct response message from the OCTT.

Central System side:

Step 1:

(Message: InstallCertificate.req) certificateType is ManufacturerRootCertificate certificate is <Configured root certificate>

Step 3:

(Message: GetInstalledCertificateIds.req) The certificateType is ManufacturerRootCertificate

Expected result(s) / behaviour

Charge Point side:

Central System side: